Skip to content

Solo Truck Loads from Poland: What to Check

Solo truck loads from Poland: GVW bands for licence and tolls, weight and axle limits, six offer parameters, the return leg and cabotage rules.

Solo Truck Loads from Poland: What to Check

Published:

Last updated:

Reading time: 6 minutes

Solo truck loads need a different check from loads for a tractor and trailer. The gross vehicle weight (GVW) of your truck comes first, because it sets the payload, the driver’s licence and the tolls on the route.

This guide is for carriers that run a solo truck on cross-border lanes out of Poland, for example to Germany, the Netherlands, France or Italy.

First you place your solo truck in its GVW band. Then you check the offer on six points and price the trip together with the return leg.

What “solo truck” means in a load offer

A solo truck is a rigid goods vehicle without a semi-trailer that carries the load on its own body. Offers usually name a box, a tilt or a curtainsider body, sometimes with a tail lift.

Polish offers call it a “solówka”. On long lanes, a solo truck carries part loads and smaller full loads, for example from Katowice to Milan or from Gdańsk to Hamburg.

The word “solówka” does not tell you how much the truck can carry. The same name covers a two-axle 7.5 t truck driven on a C1 licence and a three-axle truck of 26 t.

So always compare the weight in the offer with the band of your own solo truck. Goods weighing 10 t fit a 26 t truck, but not a truck with a GVW of 7.5 t.

A tractor unit with a semi-trailer has other limits, covered in our guide to curtainsider truck loads. Goods that need a set temperature are covered in reefer truck loads.

Solo truck GVW bands: licence and tolls

The gross vehicle weight, or maximum permissible mass, in the registration document sets who may drive the truck and where it pays tolls. The licence categories are EU-wide, and the tolls below apply on typical lanes out of Poland.

GVW bandWhat appliesSource
Over 3.5 t up to 7.5 tDriving licence category C1, from age 18.Directive 2006/126/EC, Article 4
Over 7.5 tDriving licence category C, from age 21, or from age 18 with the initial CPC qualification.Directive 2006/126/EC, Article 4
Over 3.5 tPolish e-TOLL on toll sections managed by GDDKiA, about 5,870 km of roads.e-TOLL, about the system
Over 3.5 tGerman HGV toll since 1 July 2024, on federal motorways and federal highways. Before, over 7.5 t.BMV

Thresholds as per the sources in the table, as of 12 November 2026.

Since July 2024, a lighter solo truck no longer escapes the German toll. A trip from Gdańsk to Hamburg in a 7.5 t truck therefore includes the charge for federal roads, just like a trip in a heavier truck.

The e-TOLL rate depends on road class, maximum permissible weight and emission class (e-TOLL, rates). To use Polish toll roads, the truck has to be registered in e-TOLL (e-TOLL, about the system).

In Germany, CO2 differentiation applies since 1 December 2023, and the technically permissible maximum laden mass sets the toll level (BMV). Amounts and exemptions are in our guides to road tolls in Poland and road tolls in Germany, and upcoming changes in road tolls 2027.

Solo truck weight, length and axle load

Directive 96/53/EC sets how large and how heavy a rigid motor vehicle may be in international traffic:

  • Dimensions: 12.00 m long including the body, 2.55 m wide and 4.00 m high.
  • Two axles: 18 t.
  • Three axles: 25 t, or 26 t when the driving axle has twin tyres and air suspension or equivalent, or when each driving axle has twin tyres and carries at most 9.5 t.
  • Four axles with two steering axles: 32 t, under the same conditions as 26 t.
  • Single driving axle: up to 11.5 t.

The values come from Annex I to Directive 96/53/EC, consolidated text of 14 August 2019. Alternatively fuelled and zero-emission vehicles get separate weight allowances.

The axle limit matters for part loads. Heavy pallets at the back of the body can overload the driving axle even when the whole truck stays within its GVW.

With several unloading points, agree the pallet order with the shipper before loading starts. When you load from the rear, the goods for the last drop go closest to the cab.

How to filter solo truck offers on a freight exchange

On a freight exchange, narrow the list to offers your solo truck can carry and hold. Three filters work differently from a tractor and trailer:

  • Payload, not GVW. Enter the payload from the registration document in the weight field, which is the GVW minus the truck’s own weight. With the GVW in that field, you see offers you cannot take.
  • Body with tail lift or side loading. Mark the tail lift and side loading if you have them, because that is how you reach shippers without a loading dock.
  • Pallet spaces in the body. Enter the pallets that fit in the free part of the body, not the whole truck.

Load type, regions and alerts work as for any vehicle, as our guide on how to find loads explains. Access costs per platform are in our comparison of four freight exchanges.

Solo truck loads: six parameters to check in an offer

Check these six items in an offer for a solo truck before you quote a rate.

ParameterWhat to checkWhy
Payload and GVWGross weight of the goods with pallets.GVW is the truck plus the load. Only the payload is left for the goods.
Pallet rows in the bodyNumber and type of pallets, and the internal body length.The body length tells you how many pallet rows fit.
Tail lift and floor heightWhether the shipper has a dock and whether it matches your floor.Without a matching dock, the goods go in by tail lift or from the side.
Axle loadUnloading order and where the heavy pallets stand in the body.The driving axle has its own limit, separate from the GVW.
Approach and detourKilometres from where the truck stands to the loading place, and the detour from your regular lane.Add the empty approach to the trip before you quote.
ReturnA load from the unloading region or on the way back to your base.A loaded return decides the result of the whole trip.

Work out pallet rows on an example. An EPAL Euro pallet measures 800 × 1,200 mm (EPAL), so with an internal width of at least 2.4 m, two pallets stand side by side with the long side across the body.

That row takes 0.8 m of floor. A body with an internal length of 7.2 m therefore holds 9 rows, which is 18 pallets.

When an offer gives only loading metres, convert them the same way: every 0.8 m is one row of two pallets. An offer for 4.8 loading metres therefore means 6 rows, which is 12 pallets.

Return leg: plan the load before you leave

A solo truck holds more than a groupage consignment and less than a full trailer. So a part load that would not fill a trailer can fill your body on the way back to base.

  • Look for part loads near the unloading point. Choose those that fit your payload and lie on the way.
  • Count tolls on an empty return too. The charge in Poland and Germany depends on the truck’s permissible mass, not on whether it carries goods.
  • Plan driving time for the whole loop. Price a trip from Katowice to Milan and back around the driver’s limits.

Daily driving is 9 hours, extendable to 10 hours twice a week, with 56 hours a week, 90 hours over two weeks and a 45-minute break after 4.5 hours at the latest (European Commission).

When you unload in Germany, a load from Germany to Germany is cabotage for a Polish carrier. That is national carriage for hire or reward carried out on a temporary basis in a host Member State (Regulation (EC) No 1072/2009, Article 2(6)).

After an international carriage, you may carry out at most three cabotage operations within seven days. Then the same vehicle waits four days before it does cabotage in that country again (European Commission, cabotage rules).

Where empty running comes from and how to plan the whole loop is covered in our guide to backhaul loads. To price the trip, see truck freight pricing.

Transport orders for solo trucks: assigned to your vehicle

In Transport Orders in ONYX TMS (“Zlecenia” in Polish), the shipper sends a load straight to verified carriers and sets the maximum price, and ONYX charges no commission. Orders cover every body type, solo trucks included, and you see the payment term before you accept an order.

Transport Orders currently cover only loads that start in Poland, with unloading in Poland or abroad, and we keep adding more countries and regions.

To take part, you need ONYX TMS and compatible telematics: ONYX, GBox, Transics or Trimble.

Explore Transport Orders

A solo truck offer in 4 steps

  1. Write down your truck’s band. GVW, payload, number of axles, body length and tail lift.
  2. Enter payload, not GVW, on the exchange. Add the body type and free pallet spaces.
  3. Check the GVW thresholds along the route. The driver’s licence and the toll in every country you cross.
  4. Price the loop before the rate. Approach, trip, return and the driver’s driving time.

About the author

Karolina Nowak

TSL Analyst

Specializes in fuel cost optimization, transit settlements, and improving the financial liquidity of transport companies.

FAQ

Where do I find loads for a solo truck from Poland?

Look on a freight exchange filtered by payload, body and tail lift, with shippers and forwarders on your regular lanes, and in transport orders assigned straight to your truck. Plan the return before you set off.

From what GVW does a solo truck pay e-TOLL and the German toll?

Both apply above 3.5 t. Polish e-TOLL covers vehicles with a maximum permissible weight over 3.5 t, and Germany has charged goods vehicles above 3.5 t since 1 July 2024. Rates depend on weight, emission class and road, so check the current tariffs.

Which driving licence does a solo truck need in the EU?

Under Directive 2006/126/EC, a vehicle over 3.5 t and up to 7.5 t needs category C1, from age 18. A heavier solo truck needs category C, from age 21, or from age 18 for a driver with the initial professional qualification (CPC).

Do ONYX Transport Orders cover solo trucks?

Yes. Transport Orders in ONYX TMS cover every body type in mid and long-haul transport, solo trucks included. Loading is in Poland and ONYX charges no commission. You need ONYX TMS and compatible telematics: ONYX, GBox, Transics or Trimble.

More on transport orders

Related articles

Rows of parked truck trailers seen from above

Transport under control

From one truck to a 1,000+ vehicle fleet

Contact us